Epoxy Based Primers

BILIZO MACRO PRIMER
Multi-Functional Epoxy Primer For Wet And Humid Surfaces

Product Description

It is an epoxy resin‐based, two‐component, solvent‐free, moisture tolerant, transparent sealer of low viscosity.

 Uses

  • As primer layer for polyurethane materials in wet weather conditions;
  • As primer layer before polyurea application;
  • As primer layer before application of epoxy or polyurethane top‐coats on the concrete, cement or epoxy mortars for floors subject to medium to heavy load;
  • As concrete primer to wet the concrete surface and provide a good adhesion bridge before top‐coats of epoxy mortar, epoxy self‐leveling screed, epoxy laminate or epoxy/polyurethane;
  • As binder for preparation of level stabilization, repair and improvement mortar;
  • As binder for preparation of epoxy mortar to obtain a thickness of 5 – 8 mm;
  • For repair of big cracks and form of chamfering by mixing with silica sand or different fills;
  • As primer layer before polyurethane foam application.

Consumption

As an impregnation primer: 0.3 – 0.4 kg/m2.
Depending on the system solutions, the usage and amount may change.

Clean Up: Cellulosic thinner.

Advantages

  • Low viscosity and resilient structure.
  • High wetting capability.

Applicable on damp concrete (wet concrete), cured even in contact with water after application

Packaging

BILIZO® MACRO PRIMER A+B is supplied in 10+4 kg and 3+1,2 kg pails.

< Back