BILIZO EPOXY COAT
Multi-Purpose Epoxy Coating Compound

Product Description

• Waterproofing of interior and exterior areas ,  
• Waterproofing of vertical and horizontal applications.
• Waterproofing of basement floors.
• Waterproofing of foundation wall,
• Waterproofing of tunnels.
• Waterproofing of Semi-Olimpic Swimming Pools
• Waterproofing of elevator shafts.
• Waterproofing of retaining walls.

15 kg set of BILIZO® EPOXY COAT consists of Component A in one pail of net 12,5 kg and Component B in one gallon of net 2,5 kg.

Consumption

•As impregnation primer: 450‐600 gr/m2
(Depending on the concrete surface, it is recommended to thin it with Epoxy Thinner by 5‐10 % for better impregnation)

•As bonding bridge: 250‐500 gr/m2

•Level Stabilization Mortar: 1,7 / 1,9 kg/m2/mm
(Applied by mixing 1 unit of BILIZO® EPOXY COAT (0,5 mm) and 1 unit of quartz sand (0,1 to 0,3 mm)

•As undercoat: 1,9 kg/m2/mm
(Applied by mixing 1 unit of BILIZO® EPOXY COAT (0,5 mm) and 1 unit of quartz sand (0,1 to 0,3 mm, Optionally, the surface, while it is still wet, is broadcast with 0,4 to 0,7 mm of quartz sand by a consumption rate of 4 kg/m2 approximately)

•Epoxy Mortar: 2,2 kg/m2/mm
1 unit of BILIZO® EPOXY COAT is mixed with 8 units of quartz sand which is mixed as mentioned below:
0.1 to 0.6 mm quartz sand 25 units
0.6 to 2.0 mm quartz sand 50 units
2.0 to 4.0 mm quartz sand 25 units

Advantages

• Multi-purpose
  
• Low viscosity
  
• Perfect bonding
  
• High concrete wetting capacity
  
• Applicable on damp concrete
• Enduring against heavy loads

< Back