Cement Based Waterproofing Materials

BILIZO SEAL 610
Cement and Polymer Dispersion Based, Two Component, Applied to Both Negative and Positive Direction Waterproofing Material

Product Description

BILIZO® SEAL 610 ; is a cement and polymer dispersion based waterproofing material that can apply on both negative and positive directions.

The coating cures to form a water impermeable membrane with excellent adhesion to the substrate.

BILIZO® SEAL 610 ; blocks the surface moisture , leaks and surface water perfectly.

 Uses

  • Waterproofing of interior and exterior areas  ,  from the vertical and horizontal direction of water.
  • In terraces (with the protect requirement),
  • In soft water storage basins in textile industry (PH:3-7),
  • Air conditioning stores,
  • Waterproofing of olympic swimming pools,
  • Waterproofing of water tanks,
  • Waterproofing of elevator pits.
  • The wall and floor coverings in cold air storages,
  • Waterproofing of wet areas (kitchen, bathroom etc.),
  • As a part of basic waterproofing system, in areas which sensitive to vibration and slight settlement,
  • For protecting concrete from carbonation, water and de-icing salts,
  • Waterproofing of foundation wall,
  • Waterproofing of hydroelectric power plants.

Packaging

BILIZO® SEAL 610 consists of Component A in reinforced polyethylene paper bag net 25 kg and Component B in plastic drum net 10 kg.

Consumption

BILIZO ® SEAL 610 must be applied 1,50kg/m2as the first layer, 1,20kg / m2 as the second layer, 1,20 kg/ m2 as the third layer.

Depending on the system solutions, the usage and amount may change.

Advantages

  • It can be easy prepared and applied,
  • It has a long working time.
  • It can be applied with roller or spraying machine,
  • It is effective on both negative and positive directions. ( 1 bar negative – 1,5 bar positive)
  • It has a high durability.
  • It has high adhesion resistance. It works with the surface it adhered
  • It is watervapor and air permeable.
  • It has resistant to frost.
  • It has skrink and crack resistance.
  • It creates perfect impermeable layer under ceramic and alum without being affected by deformation dua to high adhesion performance and an excellent flexibility,
  • When it applied 2 mm thickness until 0,50 mm, with waterproofing mesh it prevents cracks until 1,20 mm.
  • It is suitable to light pedestrian traffic.
  • It has high resistance to C02  ions.
  • It is used in potable water reservoirs.

< Back