Polyurethane Based Waterproofing Materials

MARISEAL 600
Liquid-applied, Two Component Polyurethane Waterproofing Membrane

Product Description

MARISEAL® 600 is a fast-curing, liquid-applied, highly permanent elastic, cold applied and cold curing, bitumen extended, two component polyurethane membrane used for long-lasting waterproofing. Solvent based.
The MARISEAL® 600 is based on pure elastomeric hydrophobic polyurethane resins, and is extended with chemically polymerized virgin bitumen, which result in excellent mechanical, chemical, thermal and natural element resistance properties. Cures by reaction (cross linking) of the two components.

Uses

  • Waterproofing of Foundations
  • Waterproofing of Retaining Walls
  • Under-tile Waterproofing in Bathrooms, Terraces, Roofs,etc
  • Waterproofing of Roofs with inverted insulation
  • Waterproofing of Asphalt- and Bitumen-felts, EDPM membranes, etc.

Also used as a joint sealant for horizontal low-movement joints and control joints.

Packaging and Colors

MARISEAL® 600 A+B is supplied in black in 15+15 kg pails. Storage Temperature:5‐30oC

Consumption

1,0-1,5 l/m2 applied in two or three layers. This coverage is based on application by roller onto a smooth surface in optimum conditions. Factors like surface porosity, temperature and application method can alter consumption.

Advantages
  • Simple application and fast curing.
  • When applied forms seamless membrane without joints.
  • Resistant to water and frost.
  • Thick, bubble-free membrane possible.
  • Provides excellent crack-bridging properties.
  • Good water vapor blocking properties.
  • Provides excellent thermal resistance, it never turns soft.
  • Maintains its mechanical properties over a temperature span of -30oC to +90oC.
  • Provides excellent adhesion to almost any type of surface.
  • The waterproofed surface can be walked on.
  • Resistant to detergents, oils, seawater and domestic chemicals.
  • Even if the membrane gets mechanically damaged, it can be easily repaired locally within minutes.
  • Does not need the use of open flames (torch) during application.
  • Components easy mixing ratio, 1:1 by volume.

 

< Back